Description
For Al and ACSR conductors
Material
body:
Corrosion resistant, high strength aluminium alloy (AlMgSi1/Al6082).
Bolts:
Steel, 8.8, two bolts according to DIN 933, hot-dip galvanised two bolts according to DIN 931 (BM), hot-dip galvanised
Conical Washers:
Steel according to DIN 6796, corrosion-protected
Corrugated jaw-clamps have been developed for full tension and current-carrying connections of aluminium and aluminium/steel.
The corrugated clamp channels are additionally grooved and allow the connection of both equal and different conductor cross sections.
All components of the clamp are captive. For installation, the clamp need not be disassembled. The (BM) bolts of the clamp are turned back up to the stop and subsequently the conductors are inserted from the side.
If the clamps are installed as per instructions, the assemblies comply with all requirements of VDE 0210/0211 and OVE-L 11/1967.
Minimum Torque Moments:
M8 : 23Nm
BM8 : 23Nm
M10 : 46Nm
BM10 : 46Nm
M12 : 80Nm
BM12 : 80Nm
[table responsive=”collapse” id=83 /]
Diagrams: