Cu Full-Tension Compression Joint

DIN 48085 part 1

Share on facebook
Share on twitter
Share on linkedin
Share on print
Share on whatsapp

Description

For full tension connections suitable for copper conductors according to DIN 48201.

Material:

E-Cu

Surface:

Uncoated

Cat. No. Conductor
Cross-Section
sq. mm
Conductor
ֳ˜ mm
Die
Code
No.
Dimensions mmNo. of
Compressions
Weight
100 Pcs.
Kg.
D1Lmechhyd
101301045 6 3.00 5 3.80 65 04-Apr - 0.8
101301046 10 4.05 8 4.50 80 6-6 - 3.1
101301047 16 5.10 8 5.50 95 6-6 - 3.3
101301048 25 6.30 10 7.00 80 4-4 - 3.3
101301049 35 7.50 12 8.25 95 6-6 - 6.2
101301050 50 9.00 14 10.00 95 06-Jun - 9.1
101301051 70 10.50 16 11.50 95 06-Jun - 11.1
101301052 95 12.50 20 13.50 145 8-8 - 24
101301053 120 14.00 22 15.00 160 08-Aug 4-4 36.5
101301054 150 15.70 25 17.00 182 12-12 5-5 40.7
101301055 185 17.50 30 18.50 260 - 05-May 102.5
101301056 240 20.30 34 21.50 310 - 6-6 152
101301057 300 22.50 38 24.00 360 - 7-7 220

 User Instructions:

The compression joints are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number.

For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper, bronze and steel compression joints, whereas aluminium compression joints require electro-galvanized dies (white).

For hydraulic compression tools there is no differentiation of dies for different metals.
The compression sleeve non-tension and full-tension of aluminium compression joints and of full-tension copper compression joints are prefilled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off.

Assembly Instructions:

  1. Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
  2. Insert conductor or cable ends into the compression sleeve up to the centre.
  3. Before proceeding, make sure that the code number on the compression joint is matched to that on the compression die.
  4. Compression joints are compressed by making the first compression at the centre and working out toward the ends. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.

Diagram:

s2-111

 

 

 

Share on facebook
Share on twitter
Share on linkedin
Share on print
Share on whatsapp

Related products

Close Menu
×

Cart

Skip to content