Aluminium Compression Cable Lug According To DIN 46329

DIN 48201, DIN 57295

Share on facebook
Share on twitter
Share on linkedin
Share on print
Share on whatsapp

Description

For aluminium conductors

Extrusion-molded, longitudinally sealed. For stranded circular, stranded sector-shaped, solid circular and solid sector-shaped aluminium conductors according to DIN VDE 0295

Material:

Al 99.5

Surface:

Tin-plated.

Stranded and solid sector-shaped conductors shall be rounded with round-forming dies. Solid circular and solid sector-shaped aluminium conductors can only be compressed with hand-operated mechanical compression tools. Al compression cable lugs are pre-filled with compression compound delivered and sealed with plastic bags.

Cat. No.Ref.Conductor
Cross Section
Conductor
Diameter
Die Code
No.
DimensionsWeight 100 pcs.
Kg. (Approx.)
No. of units (in a box)
rm/smseDIN 57295
ֳ˜ mm
DIN 48201
ֳ˜ mm
d1d2ld3
101301950 16x8 16 25 5.2-5.6 5.1 12 6 8.5 53 20 1.6100
10130195116X10100
101301952 25x8 25 35 5.6-6.7 6.3 12 6.8 8.5 53 25 1.6100
10130195325X10100
10130195435X8100
101301955 35x10 35 50 6.6-7.8 7.5 14 8.3 10.5 62 25 2.4100
10130195635X13100
10130195750X850
101301958 50x10 50 70 7.7-9.4 9.0 16 10.0 10.5 62 25 350
10130195950X1350
101301960 70x10 70 95 9.3-11.0 10.5 18 11.5 10.5 72 25 4.350
10130196170X1350
10130196395X1050
10130196295X1395 120 11.0-12.4 12.5 22 13.2 13.0 75 25650
101301964 120x13120 150 12.5-13.6 14.0 22 14.7 13.0 80 30 7.150
101301965120X1750
101301970150X10-
101301966
150x13 150 185 13.9-15.0 15.7 25 16.3 13.0 90 30 9.6 50
101301967150X1750
101302189185X1350
101302190 185x17
185 240 15.5-16.8 17.5 28 18.3 17 91 30 11.450
101302191240X1350
101302192
240x17 240 300 17.8-19.2 20.3 32 21.0 17.0 103 38 16.750
101302195300X1325
101302196 300x17 300 - 20.0-21.6 22.5 34 23.3 17.0 103 38 18.725
101302197400X1315
101302198 400x17 400 - - 26.0 38 28 17.0 116 43 34.015
101302200500X1320
101302201500x17500 - - 29.1 44 31.0 17.0 122 43 40.420

User Instructions:

The compression cable lugs are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number.

For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper cable lugs, whereas aluminium cable lugs require electro-galvanized dies (white).

For hydraulic compression tools there is no differentiation of dies for copper or aluminium cable lugs.

The compression sleeve of aluminium cable lugs is pre-filled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off.

Copper cable lugs are not pre-filled with compression compound.

Assembly Instructions:

  1. Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
  2. Insert conductor or cable ends into the compression sleeve up to the stop.
  3. Before proceeding, make sure that the code number on the cable lug matches that on the compression die.
  4. Cable lugs are compressed by starting from the plate end and working out toward the sleeve end. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.

Mezer_11-11_11-29-13

Diagram:

3.3

Share on facebook
Share on twitter
Share on linkedin
Share on print
Share on whatsapp

Related products

Close Menu
×

Cart

Skip to content